GASKET,ACCESS DOOR | SAM.gov Opportunity | G2X

GASKET,ACCESS DOOR

SolicitationN0010426QAC50Notice typeSolicitation

Attachments

1 file

Name	Type	Posted	Actions
https://www.neco.navy.mil/biz_ops/840-v5soln.aspx?soln=N0010426QAC50	LINK	Jun 12, 2026	Download

Version History

GASKET,ACCESS DOOR

SolicitationN0010426QAC50Jun 12, 2026 · v1

LatestViewing

Opportunity Summary

NAVSUP Weapon Systems Support Mechanicsburg has issued solicitation N0010426QAC50 for the manufacture of access door gaskets, identified by part number 6153657-001 and CAGE code 53711. This procurement is a total small business set-aside under NAICS 333998, All Other Miscellaneous General Purpose Machinery Manufacturing. The associated product service code is 99. The resulting fixed-price contract will require the delivery of supplies within 90 days, with all items subject to government source inspection per FAR 52.246-2.

The scope of work entails the manufacture and design of gaskets according to specific material and physical requirements detailed in government drawings and applicable documents, including ASTM-D1056 and MIL-DTL-31000. Contractors must adhere to strict marking standards under MIL-STD-130 and maintain configuration control. Because these components are shelf-life items, they must have at least 85 percent of their shelf life remaining upon receipt by the government. All units and packaging must be marked with manufacture or cure dates and expiration or inspection dates in accordance with MIL-STD-129.

Responses to this solicitation are due by July 13, 2026. The place of performance is not specified in the notice metadata, but the point of contact is located at NAVSUP WSS in Mechanicsburg, Pennsylvania. Award rationale is based on the government’s acceptance of a contractor’s proposal, which will constitute a bilateral agreement. All payments will be processed through Wide Area Workflow as a combo invoice and receiving report with destination-based shipping terms. No attachments are currently included with the notice; however, drawings are accessible through the electronic solicitation via SAM.gov.

Generated by Lumen AI

Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.

Opportunity Summary

Opportunity Details

Response deadline: Jul 13, 202630 days remaining
NAICS: 333998 (opens in new tab)
PSC: 99 (opens in new tab)
Set aside: —
Published: Jun 12, 2026
Updated: Jun 12, 2026
Agency: DEPT OF THE NAVY (opens in new tab)
Office: NAVSUP WEAPON SYSTEMS SUPPORT MECH
Department: —
Source: View on SAM.gov (opens in new tab)

Contact and place of performance

Point of contact: Telephone: 7176052172

Place of performance: Not specified

Original Description

CONTACT INFORMATION|4|N97113D|FAC|+1 771-229-0462|[email protected]| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| STOP-WORK ORDER (AUG 1989)|1|| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (Combo)|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD|N/A|N/A|N/A|N/A|[email protected]| NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER|3|||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025))|1|| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| TO VIEW THE DRAWINGS: Go to www.https://beta.sam.gov/ Click: Contract Opportunities and enter the solicitation number. This gives you access to the Electronic Solicitation. Drawings can be viewed or downloaded. GOVERNMENT SOURCE INSPECTION per FAR 52.246-2 IS REQUIRED. DELIVERY_____90__________DAYS. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited inthe mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture of the GASKET,ACCESS DOOR . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.1.3 The "Document Changes" section provides supersessions/changes to referenced documents. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the drawings shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DRAWING DATA=56293 |53711| 4|OD |D|0000.A | 4|49998|0018500 DRAWING DATA=56293 |53711| 4|OD |D|0000.B | 3|49998|0021965 DRAWING DATA=56293 |53711| 4|OD |D|0000.C | 2|49998|0024872 DRAWING DATA=56293 |53711| 4|OD |D|0000.COV | 4|49998|0038973 DRAWING DATA=56293 |53711| 4|OD |D|0000.D | 1|49998|0026986 DRAWING DATA=56293 |53711| 4|OD |D|0000.II | 4|49998|0015689 DRAWING DATA=56293 |53711| 4|OD |D|0000.III | -|49998|0026790 DRAWING DATA=56293 |53711| 4|OD |D|0000.IV | -|49998|0008318 DRAWING DATA=56293 |53711| 4|OD |D|0000.V | -|49998|0037946 DRAWING DATA=56293 |53711| 4|OD |D|0001.1 | -|49998|0039238 DRAWING DATA=56293 |53711| 4|OD |D|0001.2 | -|49998|0024017 DRAWING DATA=56293 |53711| 4|OD |D|0002.1 | 2|49998|0019410 DRAWING DATA=56293 |53711| 4|OD |D|0003.1 | 1|49998|0028858 DRAWING DATA=56293 |53711| 4|OD |D|0003.2 | -|49998|0028844 DRAWING DATA=56293 |53711| 4|OD |D|0003.3 | -|49998|0031180 DRAWING DATA=56293 |53711| 4|OD |D|0003.4 | -|49998|0032024 DRAWING DATA=56293 |53711| 4|OD |D|0003.5 | -|49998|0012193 DRAWING DATA=56293 |53711| 4|OD |D|0004.1 | 4|49998|0027622 DRAWING DATA=56293 |53711| 4|OD |D|0004.2 | -|49998|0021502 DRAWING DATA=56293 |53711| 4|OD |D|0004.3 | -|49998|0015474 DRAWING DATA=56293 |53711| 4|OD |D|0005.1 | 1|49998|0028854 DRAWING DATA=56293 |53711| 4|OD |D|0005.2 | -|49998|0033261 DRAWING DATA=56293 |53711| 4|OD |D|0005.3 | -|49998|0035235 DRAWING DATA=56293 |53711| 4|OD |D|0005.4 | 2|49998|0036465 DRAWING DATA=56293 |53711| 4|OD |D|0005.5 | 2|49998|0021294 DRAWING DATA=56293 |53711| 4|OD |D|0005.5A1 | -|49998|0012105 DRAWING DATA=56293 |53711| 4|OD |D|0005.5A2 | 2|49998|0061537 DRAWING DATA=6153657 |53711| -| |D|0001 | -|49998|0013067 DRAWING DATA=6153657-P88K7 |53711| -|1N |D|0001 | -|49998|0134972 DOCUMENT REF DATA=ASTM-D1056 | | |85 |860131|A| | | DOCUMENT REF DATA=ASME-Y14.5M | | | |940313|A| | | DOCUMENT REF DATA=MIL-DTL-31000 | | |C |040709|A| | | DOCUMENT CHANGE DATA=ANSI-Y14.5 |ASME-Y14.5M DOCUMENT CHANGE DATA=MIL-D-1000 |MIL-DTL-31000 3. REQUIREMENTS 3.1 Manufacturing and Design - The GASKET,ACCESS DOOR furnished under this contract/purchase order shall meet the material and physical requirements as specified ;p/n 6153657-001 cage 53711; . 3.2 Marking - Unless marking requirements are specified by a document or drawing cited in this solicitation all items delivered under this contract/purchase order shall be marked and identified in accordance with the applicable Military Standards and Specifications as follows: Mechanical Parts, Assemblies and Equipments - MIL-STD-130 Electrical and Electronic Parts - MIL-STD-1285, Method 1. Electrical and Electronic Parts and Assemblies not covered by MIL-STD-1285-use MIL-STD-130. Electronic Equipment - MIL-STD-454 Requirement Number 67. Electrical Equipment - MIL-P-15024/5 (SHIPS) 3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.4 SHELF LIFE REQUIREMENT - The following is excerpts from DOD 4140.27-M Shelf Life Management Manual. This requirement is mandated by MIL-STD-129P referenced under the Preservation, Packing and Marking portion of this TDP. 2-12. 85 Percent SHELF-LIFE REMAINING REQUIREMENT APPLICABLE TO ACQUISITION/PROCUREMENT A. Acquisition/procurement documentation shall specify that shelf-life items/material will have not less than 85 percent (allowing for rounding to whole months) of shelf-life remaining at time of receipt by the first Government activity. Any delivery from a contractor not having at least 85 percent shelf-life remaining shall normally be considered non-conforming. Refer to Appendix E of this Manual to determine the amount of time that 85% equates to in terms of remaining shelf life for Type I or Type II shelf-life codes. B. In supporting imminent use or consumption, the 85% shelf-life remaining on receipt by first Government activity may be modified or adjusted as deemed prudent at the discretion of PMs and IMMs, when support alternative arrangements such as EC, PV, DVD or local purchase are effected. Use of support alternatives for shipment/delivery to storage facilities as stock will conform to the 85% rule. 2-13. CONTRACTOR MARKING. Shelf life items will be marked for identification and control. Markings, shown below the item identification data are required on all units, intermediate, and exterior packs or unpacked items, shall be per MIL STD 129, MIL-STD-130, MIL STD 290 (FSC 9150 only), or FED STD 123, (references (m) through (p)) respectively, and will include the following: A. For Type I shelf life items: apply one, as appropriate; date manufactured, date cured (for elastomeric and rubber products only), date assembled, or date packed (subsistence only); and expiration date. B. For Type II shelf life items: apply one, as appropriate; date manufactured, date cured (for elastomeric and other rubber products only), date assembled, and date packed (subsistence only), and inspect/test date. C. For both Type I and Type II markings in subparagraphs A and B above: the date shall be expressed by the numeric month and the last 2 digits of the calendar year; i.e., 06/95, with the day of that month being the last day. D. Different Dates on Identical Items. When two or more unit packs of identical items bear different dates of manufacture, dates of cure, dates of pack, or dates of assembly, the earliest date shall be shown on the shipping container. E. For Type I drugs and biologicals: the expiration date only is required. The expiration date should be marked in accordance with FED-SPEC PPP C 186 (reference (q)). Manufacturer date shall not be shown for medical items having expiration dates. F. For cure-dated items: shelf life markings on physical material are expressed by month or quarter and year designations (i.e., 11/2001,or 3Q2001). Shelf life periods end on the last day of the cited month or quarter. Appendix E SHELF LIFE CODES Required Number of Months/Quarters Remaining Upon Receipt by the first Government activity Type I Type II Months Quanters Shelf Life Period Non-Deteriorative 0 0 N/A N/A No Shelf-Life Applies (zero) (zero) 01 Month A N/A 25 DAYS N/A 02 Months B N/A 50 DAYS N/A 03 Months C 1 75 DAYS N/A 04 Months D N/A 3 1 05 Months E N/A 4 1 06 Months F 2 5 2 09 Months G 3 8 3 12 Months (1.00-Years) H 4 10 3 15 Months (1.25-Years) J N/A 13 4 18 Months (1.50-Years) K 5 15 5 21 Months (1.75-Years) L N/A 18 6 24 Months (2.00-Years) M 6 21 7 27 Months (2.25-Years) N N/A 23 8 30 Months (2.50-Years) P N/A 26 9 36 Months (3.00-Years) Q 7 31 10 48 Months (4.00-Years) R 8 41 14 60 Months (5.00-Years) S 9 51 17 72 Months (6.00-Years) I N/A 61 20 84 Months (7.00-Years) T N/A 71 24 96 Months (8.00-Years U N/A 82 27 Variable such as: V N/A 77, 113, 26, 38, 61 90, 132,216,228, etc. 184, 194 65, ETC. Months or any other ETC. Number of months not Specifically assigned. 120 Months (10-Years) W N/A 102 34 180 Months (15-Years) Y N/A 153 51 240 Months (20-Years) Z N/A 204 68 Shelf-Life Period Greater N/A X 85 percent 85 percent Than 60 Months for Type of number of number II Extendible Items months months 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchause order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection reqiurements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed reqiurements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. If you have a problem connecting to the DODSSP Website, please contact either the Subscription Service Desk (215)697-2569, or the Special Assistance Desk (215)697-2667. The DODSSP Customer Service Staff is available every business day between the hours of 7:30 AM and 4:00 PM Eastern Time to answer your questions or assist in solving any problems you might encounter when ordering from the DODSSP collection of Defense specifications and standards, Federal specifications and standards used by DOD, and other DOD standardization documents. Mail requests should be submitted to: Navy Publishing and Printing Service (Subscriptions) Building 4D 700 Robbins Ave. Phildelphia, Pa. 19111 Attn: DODSSP Requests can be transmitted to DODSSP via FAX number (215)697-1462. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. Ordnance Documents (OD) - Ordnance Documents may be obtained by submitting a request to: Commanding Officer Naval Surface Warfare Center Port Hueneme Div Code 5A00 Port Hueneme, California 93043 E. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. F. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 H. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 I. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. p/n: 6153657-001 cage 53711