Smoke Jumper Parachutes

The US Forest Service (USFS) intends to award a sole source purchase order under the authority of FAR 13.501(a), due to only one source being available to meet the Government's needs, to Complete Parachute Solutions, Inc., 1320 E. International Speedway Blvd, DeLand, FL 59808-9361. The requirement is for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to purchase CR-360 M1 parachutes (P/N CPS-CR-360 M1) for USFS Region 1 Aerial Fire Depot on an as needed basis. The parachutes must accommodate a payload ranging from 220 to 400 pounds. They must also be compatible with currently approved US Forest Service ram-air container system, be able to achieve descent rates from 0 to 10 feet per second in no wind conditions and also must be able to reach these rates using a static, deep brake setting. The canopy must have at least a 20 mph forward speed to operate in high wind conditions. Additionally, the parachute must be is compatible with the USFS approved main container Model 9711. Parachutes must be approved through the USFS canopy evaluation plan that consists of 4 phases in 2012. The objective of the USFS canopy evaluation plan is to systematically evaluate potential smokejumper canopies and their suitability for smokejumper operations. The phases include: a) Phase I testing consist of three parts: *Trim jump- Ensures the canopy is set up correctly tor evaluation jumps. *Evaluation jumps- Jumper perform specific maneuvers and compare the canopy against currently approved USFS canopies. *Flight performance data. b) Phase II evaluates the viability of the canopy in terrain and tight jump spots. c) Phase III is a field test to evaluate the canopy under normal field conditions. d) Phase IV is an extended field evaluation to determine canopy reliability. In order for a canopy to be approved for FS smokejumper use it must pass all four phases This notice of intent is not a request for competitive proposals and no solicitation document exists for the requirement. Sources interested in responding to this notice are required to submit a capability statement that includes management and technical data and cost information, in sufficient detail and with convincing evidence that clearly demonstrates the capability to provide the USFS's requirement. Capability statements shall not exceed five (5) pages using a font size no smaller than 10-point. All capability statements received by the due date of this notice will be considered by the Government. A request for documentation or additional information or submissions that only ask questions will not be considered as an affirmative response. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement or to proceed with a sole source purchase order. Capability statements are due by 4:00 PM Pacific Time, February 25, 2016. Capability statements shall be submitted by e-mail ONLY as a Microsoft Word or Adobe PDF attachment to the following address: [email protected]