Name | Type | Posted | Actions |
|---|---|---|---|
B08_RFQ_W90WL520Q0001_Weld_Inspection.pdf | Oct 9, 2019 |
WELD INSPECTION
Contact and place of performance
Farrel E. DeLeeuw
TOOELE, UT 84074
USA
Certified Weld Inspection of One-Metric Ton Containers: inspector shall be certified Nondestructive Examination (NDE) Level II or Level III. All welding inspection and/or visual inspection shall be performed by personnel certified in accordance with AWS D1.1 and AWS QC1 as minimum of CWI (Certified Welding Inspector). The CWI shall perform visual inspection of one hundred percent (100%) of each container's welds in accordance with AWS D1.1, Table 6.1, for Statically Loaded Connections. See included Performance Work Statement and Attached product drawing for detail.
The Department of the Air Force, through the Tooele Army Depot, is soliciting certified weld inspection services for one-metric ton containers. This requirement involves the visual inspection of 100 percent of each container's welds in accordance with AWS D1.1, Table 6.1, for statically loaded connections. All inspections must be performed by personnel certified as Nondestructive Examination (NDE) Level II or Level III and qualified as a Certified Welding Inspector (CWI) per AWS D1.1 and AWS QC1 standards. Detailed technical requirements are located in the Performance Work Statement and product drawings included with the solicitation.
This acquisition is designated as an SBA set-aside under NAICS 541380, Testing Laboratories and Services, and PSC H, which covers quality control, testing, and inspection. Performance will take place in Tooele, Utah. One attachment, a request for quotes identified as B08_RFQ_W90WL520Q0001_Weld_Inspection.pdf, was issued on October 9, 2019, under solicitation number W90WL520Q0001. Responses are due by October 21, 2019, and Farrel E. DeLeeuw serves as the point of contact for this requirement.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.