Name | Type | Posted | Actions |
|---|---|---|---|
https://dodprocurementtoolbox.com/ | LINK | Dec 12, 2025 | |
https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf | LINK | Dec 12, 2025 | |
https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml | LINK | Dec 12, 2025 | |
https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S226U2323¬iceType=CombinedSynopsisSolicitation | LINK | Dec 12, 2025 |
WIRE EDM
Contact and place of performance
David Fortune
74501
MITSUBISHI EDM Model MV4800-STHIS IS FOR A WIRE EDM THAT MEETS AT MINIMUM THE FOLLOWING SPECIFICATIONS.CUTTING TRAVEL: X-AXIS NEEDS TO BE AT LEAST 15 INCHES; Y-AXIS TRAVEL NEEDS TO BE AT LEAST 18 INCHES; Z-AXIS TRAVEL NEEDS TO BE AT LEAST 16 INCHESWIRE RANGE NEEDS TO AT LEAST COVER .006 INCH TO .012 INCHFILTER SYSTEM NEEDS TO FILTER WATER TO 5 MICRONSPOWER REQUIREMENTS TO BE 208V/60Hz/3PHSTANDARD EQUIPMENT NEEDS TO INCLUDE:WATER LEVEL CONTROLS FOR Z-AXISAUTO THREADER FOR WIRECHILLERWIRE SPOOLS 10KG AND 25KGWIRE CHOPPER (PROCESSOR)AUTO POWER RECOVERYWORK CLAMPING KITANGLE CONTROLSLINEAR SCALES ON X AND Y AXIS TO 2 MILLIONTHS ABSOLUTE SCALES
The Department of the Army, MICC-Fort Drum, has issued this combined synopsis/solicitation under solicitation number W911S226U2323 for the procurement of a Wire Electrical Discharge Machine (EDM). This requirement specifically seeks a Mitsubishi EDM Model MV4800-S or a machine meeting minimum technical specifications, including X-axis travel of at least 15 inches, Y-axis travel of 18 inches, and Z-axis travel of 16 inches. The equipment must support a wire range from .006 to .012 inches and feature a filtration system capable of filtering water to 5 microns. Power requirements for the unit are 208V/60Hz/3PH.
Standard equipment for the machine must include Z-axis water level controls, an auto-threader, a chiller, and wire spools for 10kg and 25kg capacities. Additional required components include a wire chopper processor, auto power recovery, a work clamping kit, angle controls, and absolute linear scales on the X and Y axes to 2 millionths. This procurement is identified under NAICS 332710 for Machine Shops and PSC 3410 for Electrical and Ultrasonic Erosion Machines.
The opportunity is designated as an SBA (Small Business Administration) set-aside. David Fortune serves as the point of contact for this solicitation. Responses are due by December 22, 2025, following the initial publication on December 12, 2025. No attachments are currently associated with this notice.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.