Tire, Pneumatic

Please review the Market Research Questionnaire and Spreadsheet (both are included with this posting) for the National Stock Numbers (NSNs) required, and provide any sources that may be able to supply these items. The currently approved source(s) and part number(s) for each NSN are listed on the Market Research Spreadsheet. The Product Item Description for each item follows below. All information may be submitted directly to the buyer at [email protected] CL19310001 Product Item Description (PID)/Packaging/Marking - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 2610-01-537-4093 TIRE, PNEUMATIC, VEHICLE REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS120 REFERENCE NUMBER:CS001 TYPE I, 72 MONTHS SHELF LIFE ** EXCEPTION: This shelf life item is Non-Extendable, Code I, with a total shelf life of seventy two months. Material furnished under this contract/order shall have at least 48 months of shelf life remaining at time of delivery. REFERENCE NUMBER:CS187 TIRE CHARACTERISTICS SOURCE CONTROL DRAWING TIRE SIZE DESIGNATION: 365/80R20MPT TIRE STRENGTH: LOAD RANGE L TIRE LOAD MAX. CAPACITY: 7830 LBS MAX. INFLATION PRESSURE: 90 PSI MATERIAL: RUBBER, NATURAL TIRE CONSTRUCTION: RADIAL TIRE AIR RETENTION METHOD: TUBELESS TYPE FLAP: NO SERVICE TYPE: MILITARY TRUCK / BUS TREAD DESIGN: ALL SEASON MUD / SNOW LUG VEHICLE APPLICATION: JOINT LIGHT TACTICAL VEHICLE (JLTV) ; RG 31 LIGHT ARMORED VEHICLE COUNTERMINE EQUIPMENT NSN 2355-20-001-9926 Michelin North America, Inc. DBA 12195 P/N 97627 IAW BASIC DRAWING NR 19207 12601053 REVISION NR C DTD 06/05/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-129R(2) REVISION NR R DTD 09/27/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12612043 REVISION NR DTD 01/23/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12601053 REVISION NR DTD 08/08/2019 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE = Q: PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4 REFERENCE NUMBER:ZDL58 CLIN 0002: NSN: 2610-01-678-8323 TIRE, PNEUMATIC, VEHI REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZL001 REFERENCE NUMBER:ZD080 REFERENCE NUMBER:A0003 REFERENCE NUMBER:Q0106 REFERENCE NUMBER:CA060 Michelin North America, Inc. DBA 12195 P/N 303274 PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D3 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE = Q: PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 REFERENCE NUMBER:CQSLS ************************************************************************************* GLOSSARY ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. REFERENCE NUMBER CS001 EXPORT CONTROL OF TECHNICAL DATA: This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have beenapproved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER ZDL58 PRESERVATION & PACKAGING SHALL BE IAW THE LATEST REVISION OF MIL-DTL-4 PACKAGING OF NON-AIRCRAFT TIRES AND INNER-TUBES. SPECIAL MARKING REQUIREMENT: APPLY SHELF LIFE MARKINGS IAW MIL-STD-129. REFERENCE NUMBER ZL001 ** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. ** REFERENCE NUMBER ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. REFERENCE NUMBER A0003 MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY REFERENCE NUMBER Q0106 Replaced by ZD080 REFERENCE NUMBER CA060 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER CQSLS THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE S, WITH A TOTAL SHELF LIFE OF SIXTY MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL HAVE AT LEAST 85% (51 MONTHS) OF SHELF LIFE REMAINING AT TIME OF DELIVERY.